# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2017 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = testsuite
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
	$(top_srcdir)/../config/enable.m4 \
	$(top_srcdir)/../config/futex.m4 \
	$(top_srcdir)/../config/hwcaps.m4 \
	$(top_srcdir)/../config/iconv.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/lib-ld.m4 \
	$(top_srcdir)/../config/lib-link.m4 \
	$(top_srcdir)/../config/lib-prefix.m4 \
	$(top_srcdir)/../config/lthostflags.m4 \
	$(top_srcdir)/../config/multi.m4 \
	$(top_srcdir)/../config/no-executables.m4 \
	$(top_srcdir)/../config/override.m4 \
	$(top_srcdir)/../config/stdint.m4 \
	$(top_srcdir)/../config/toolexeclibdir.m4 \
	$(top_srcdir)/../config/unwind_ipinfo.m4 \
	$(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
	$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
	$(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \
	$(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/../config/gc++filt.m4 \
	$(top_srcdir)/../config/tls.m4 $(top_srcdir)/../config/gthr.m4 \
	$(top_srcdir)/../config/cet.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
depcomp =
am__depfiles_maybe =
SOURCES =
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@
ACLOCAL = @ACLOCAL@
ALLOCATOR_H = @ALLOCATOR_H@
ALLOCATOR_NAME = @ALLOCATOR_NAME@
ALLOC_FILE = @ALLOC_FILE@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@
ATOMIC_FLAGS = @ATOMIC_FLAGS@
ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BACKTRACE_CPPFLAGS = @BACKTRACE_CPPFLAGS@
BACKTRACE_SUPPORTED = @BACKTRACE_SUPPORTED@
BACKTRACE_SUPPORTS_THREADS = @BACKTRACE_SUPPORTS_THREADS@
BACKTRACE_USES_MALLOC = @BACKTRACE_USES_MALLOC@
BASIC_FILE_CC = @BASIC_FILE_CC@
BASIC_FILE_H = @BASIC_FILE_H@
CC = @CC@
CCODECVT_CC = @CCODECVT_CC@
CCOLLATE_CC = @CCOLLATE_CC@
CCTYPE_CC = @CCTYPE_CC@
CFLAGS = @CFLAGS@
CLOCALE_CC = @CLOCALE_CC@
CLOCALE_H = @CLOCALE_H@
CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@
CMESSAGES_CC = @CMESSAGES_CC@
CMESSAGES_H = @CMESSAGES_H@
CMONEY_CC = @CMONEY_CC@
CNUMERIC_CC = @CNUMERIC_CC@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@
CPU_OPT_BITS_RANDOM = @CPU_OPT_BITS_RANDOM@
CPU_OPT_EXT_RANDOM = @CPU_OPT_EXT_RANDOM@
CSTDIO_H = @CSTDIO_H@
CTIME_CC = @CTIME_CC@
CTIME_H = @CTIME_H@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXFILT = @CXXFILT@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
C_INCLUDE_DIR = @C_INCLUDE_DIR@
DBLATEX = @DBLATEX@
DEBUG_FLAGS = @DEBUG_FLAGS@
DEFS = @DEFS@
DOT = @DOT@
DOXYGEN = @DOXYGEN@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ERROR_CONSTANTS_SRCDIR = @ERROR_CONSTANTS_SRCDIR@
EXEEXT = @EXEEXT@
EXTRA_CFLAGS = @EXTRA_CFLAGS@
EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@
FGREP = @FGREP@
FORMAT_FILE = @FORMAT_FILE@
FREESTANDING_FLAGS = @FREESTANDING_FLAGS@
GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@
GLIBCXX_LIBS = @GLIBCXX_LIBS@
GREP = @GREP@
HWCAP_CFLAGS = @HWCAP_CFLAGS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LONG_DOUBLE_128_FLAGS = @LONG_DOUBLE_128_FLAGS@
LONG_DOUBLE_ALT128_COMPAT_FLAGS = @LONG_DOUBLE_ALT128_COMPAT_FLAGS@
LONG_DOUBLE_COMPAT_FLAGS = @LONG_DOUBLE_COMPAT_FLAGS@
LTLIBICONV = @LTLIBICONV@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@
OPT_LDFLAGS = @OPT_LDFLAGS@
OS_INC_SRCDIR = @OS_INC_SRCDIR@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PDFLATEX = @PDFLATEX@
RANLIB = @RANLIB@
SECTION_FLAGS = @SECTION_FLAGS@
SECTION_LDFLAGS = @SECTION_LDFLAGS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
SYMVER_FILE = @SYMVER_FILE@
TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
VIEW_FILE = @VIEW_FILE@
VTV_CXXFLAGS = @VTV_CXXFLAGS@
VTV_CXXLINKFLAGS = @VTV_CXXLINKFLAGS@
VTV_PCH_CXXFLAGS = @VTV_PCH_CXXFLAGS@
WARN_FLAGS = @WARN_FLAGS@
XMLCATALOG = @XMLCATALOG@
XMLLINT = @XMLLINT@
XSLTPROC = @XSLTPROC@
XSL_STYLE_DIR = @XSL_STYLE_DIR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
baseline_dir = @baseline_dir@
baseline_subdir_switch = @baseline_subdir_switch@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
check_msgfmt = @check_msgfmt@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
enable_shared = @enable_shared@
enable_static = @enable_static@
exec_prefix = @exec_prefix@
get_gcc_base_ver = @get_gcc_base_ver@
glibcxx_MOFILES = @glibcxx_MOFILES@
glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@
glibcxx_POFILES = @glibcxx_POFILES@
glibcxx_builddir = @glibcxx_builddir@
glibcxx_compiler_pic_flag = @glibcxx_compiler_pic_flag@
glibcxx_compiler_shared_flag = @glibcxx_compiler_shared_flag@
glibcxx_cxx98_abi = @glibcxx_cxx98_abi@
glibcxx_localedir = @glibcxx_localedir@
glibcxx_lt_pic_flag = @glibcxx_lt_pic_flag@
glibcxx_prefixdir = @glibcxx_prefixdir@
glibcxx_srcdir = @glibcxx_srcdir@
glibcxx_toolexecdir = @glibcxx_toolexecdir@
glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@
gxx_include_dir = @gxx_include_dir@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libtool_VERSION = @libtool_VERSION@
localedir = @localedir@
localstatedir = @localstatedir@
lt_host_flags = @lt_host_flags@
mandir = @mandir@
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
port_specific_symbol_files = @port_specific_symbol_files@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
python_mod_dir = @python_mod_dir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
thread_header = @thread_header@
tmake_file = @tmake_file@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
toplevel_builddir = @toplevel_builddir@
toplevel_srcdir = @toplevel_srcdir@
AUTOMAKE_OPTIONS = nostdinc
RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
EXPECT = expect

# May be used by various substitution variables.
gcc_version := $(shell @get_gcc_base_ver@ $(top_srcdir)/../gcc/BASE-VER)
MAINT_CHARSET = latin1
mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
PWD_COMMAND = $${PWDCMD-pwd}
STAMP = echo timestamp >
toolexecdir = $(glibcxx_toolexecdir)
toolexeclibdir = $(glibcxx_toolexeclibdir)
@ENABLE_WERROR_FALSE@WERROR_FLAG = 
@ENABLE_WERROR_TRUE@WERROR_FLAG = -Werror
@ENABLE_EXTERN_TEMPLATE_FALSE@XTEMPLATE_FLAGS = 
@ENABLE_EXTERN_TEMPLATE_TRUE@XTEMPLATE_FLAGS = -fno-implicit-templates
@GLIBCXX_LDBL_ALT128_COMPAT_FALSE@LDBL_128_FLAGS = 
@GLIBCXX_LDBL_ALT128_COMPAT_TRUE@LDBL_128_FLAGS = $(LONG_DOUBLE_128_FLAGS)

# These bits are all figured out from configure.  Look in acinclude.m4
# or configure.ac to see how they are set.  See GLIBCXX_EXPORT_FLAGS.
CONFIG_CXXFLAGS = \
	$(SECTION_FLAGS) $(HWCAP_CFLAGS) -frandom-seed=$@ $(LDBL_128_FLAGS)

WARN_CXXFLAGS = \
	$(WARN_FLAGS) $(WERROR_FLAG) -fdiagnostics-show-location=once 


# -I/-D flags to pass when compiling.
AM_CPPFLAGS = $(GLIBCXX_INCLUDES) $(CPPFLAGS)

# Generated lists of files to run.  All of these names are valid make
# targets, if you wish to generate a list manually.
lists_of_files = \
   testsuite_files \
   testsuite_files_interactive \
   testsuite_files_performance \
   testsuite_files_simd

extract_symvers = $(glibcxx_builddir)/scripts/extract_symvers
baseline_subdir := $(shell $(CXX) $(baseline_subdir_switch))
check_p_numbers0 := 1 2 3 4 5 6 7 8 9
check_p_numbers1 := 0 $(check_p_numbers0)
check_p_numbers2 := $(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers1)))
check_p_numbers3 := $(addprefix 0,$(check_p_numbers1)) $(check_p_numbers2)
check_p_numbers4 := $(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers3)))
check_p_numbers5 := $(addprefix 0,$(check_p_numbers3)) $(check_p_numbers4)
check_p_numbers6 := $(foreach i,$(check_p_numbers0),$(addprefix $(i),$(check_p_numbers5)))
check_p_numbers := $(check_p_numbers0) $(check_p_numbers2) $(check_p_numbers4) $(check_p_numbers6)
check_p_subdirs = $(wordlist 1,$(if $(GCC_TEST_PARALLEL_SLOTS),$(GCC_TEST_PARALLEL_SLOTS),128),$(check_p_numbers))
check_DEJAGNU_normal_targets = $(addprefix check-DEJAGNUnormal,$(check_p_subdirs))

# Runs the testsuite, but in compile only mode.
# Can be used to test sources with non-GNU FE's at various warning
# levels and for checking compile time across releases.
# See script.
compile_script = ${glibcxx_srcdir}/scripts/check_compile

# Runs the testsuite/performance tests.
# Some of these tests create large (~75MB) files, allocate huge
# ammounts of memory, or otherwise tie up machine resources. Thus,
# running this is off by default.
# XXX Need to add dependency on libtestc++.a
check_performance_script = ${glibcxx_srcdir}/scripts/check_performance

# Runs the testsuite in debug mode.
debug_flags = "unix/-D_GLIBCXX_DEBUG"

# Runs the testsuite in parallel mode.
libgomp_dir = ${glibcxx_builddir}/../libgomp
libgomp_flags = -B${glibcxx_builddir}/../libgomp \
              -I${glibcxx_builddir}/../libgomp \
	      -L${glibcxx_builddir}/../libgomp/.libs -lgomp

atomic_flags = $(ATOMIC_FLAGS)
parallel_flags = "unix/-D_GLIBCXX_PARALLEL/-fopenmp"

# By adding these files here, automake will remove them for 'make clean'
CLEANFILES = *.txt *.tst *.exe core* filebuf_* tmp* ostream_* *.log *.sum \
	     testsuite_* site.exp abi_check baseline_symbols *TEST* *.dat \
	     *.ii *.s *.o *.cc *.x *.a *.so *.xml *.raw *.out *.gdb

all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps testsuite/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign --ignore-deps testsuite/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;
$(top_srcdir)/fragment.am $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
tags TAGS:

ctags CTAGS:

cscope cscopelist:

check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	clean-local cscopelist-am ctags-am distclean distclean-generic \
	distclean-libtool dvi dvi-am html html-am info info-am install \
	install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags-am uninstall uninstall-am

.PRECIOUS: Makefile


# This rule generates all of the testsuite_files* lists at once.
${lists_of_files}:
	${glibcxx_srcdir}/scripts/create_testsuite_files \
	  ${glibcxx_srcdir}/testsuite `${PWD_COMMAND}`

# We need more things in site.exp, but automake completely controls the
# creation of that file; there's no way to append to it without messing up
# the dependancy chains.  So we overrule automake.  This rule is exactly
# what it would have generated, plus our own additions.
site.exp: Makefile
	@echo 'Making a new site.exp file...'
	@echo '## these variables are automatically generated by make ##' >site.tmp
	@echo '# Do not edit here.  If you wish to override these values' >>site.tmp
	@echo '# edit the last section' >>site.tmp
	@echo 'set tool libstdc++' >>site.tmp
	@echo 'set srcdir $(srcdir)' >>site.tmp
	@echo "set objdir `pwd`" >>site.tmp
	@echo 'set build_alias "$(build_alias)"' >>site.tmp
	@echo 'set build_triplet $(build_triplet)' >>site.tmp
	@echo 'set host_alias "$(host_alias)"' >>site.tmp
	@echo 'set host_triplet $(host_triplet)' >>site.tmp
	@echo 'set target_alias "$(target_alias)"' >>site.tmp
	@echo 'set target_triplet $(target_triplet)' >>site.tmp
	@echo 'set libiconv "$(LIBICONV)"' >>site.tmp
	@echo 'set baseline_dir "$(baseline_dir)"' >> site.tmp
	@echo 'set baseline_subdir_switch "$(baseline_subdir_switch)"' >> site.tmp
	@echo 'set TEST_GCC_EXEC_PREFIX "$(libdir)/gcc/"' >> site.tmp
	@echo '## All variables above are generated by configure. Do Not Edit ##' >>site.tmp
	@test ! -f site.exp || \
	  sed '1,/^## All variables above are.*##/ d' site.exp >> site.tmp
	@-rm -f site.bak
	@test ! -f site.exp || mv site.exp site.bak
	@mv site.tmp site.exp

baseline_symbols:
	-@(output=${baseline_dir}/${baseline_subdir}/baseline_symbols.txt; \
	  if test ! -f $${output}; then \
	    echo "Baseline file doesn't exist."; \
	    echo "Try 'make new-abi-baseline' to create it."; \
	    exit 1; \
	  fi; true)

new-abi-baseline:
	-@$(mkinstalldirs) ${baseline_dir}/${baseline_subdir}
	-@(output=${baseline_dir}/${baseline_subdir}/baseline_symbols.txt; \
	  if test -f $${output}; then \
	    output=$${output}.new; \
	    t=`echo $${output} | sed 's=.*config/abi/=='`; \
	    echo "Baseline file already exists, writing to $${t} instead."; \
	  fi; \
	  ${extract_symvers} ../src/.libs/libstdc++.so $${output})

%/site.exp: site.exp
	-@test -d $* || mkdir $*
	@srcdir=`cd $(srcdir); ${PWD_COMMAND}`;
	@objdir=`${PWD_COMMAND}`/$*; \
	sed -e "s|^set srcdir .*$$|set srcdir $$srcdir|" \
	    -e "s|^set objdir .*$$|set objdir $$objdir|" \
	    site.exp > $*/site.exp.tmp
	@-rm -f $*/site.bak
	@test ! -f $*/site.exp || mv $*/site.exp $*/site.bak
	@mv $*/site.exp.tmp $*/site.exp
$(check_DEJAGNU_normal_targets): check-DEJAGNUnormal%: normal%/site.exp

# Run the testsuite in normal mode.
check-DEJAGNU $(check_DEJAGNU_normal_targets): check-DEJAGNU%: site.exp
	$(if $*,@)AR="$(AR)"; export AR; \
	RANLIB="$(RANLIB)"; export RANLIB; \
	if [ -z "$*" ] && [ -n "$(filter -j%, $(MFLAGS))" ]; then \
	  rm -rf normal-parallel || true; \
	  mkdir normal-parallel; \
	  $(MAKE) $(AM_MAKEFLAGS) $(check_DEJAGNU_normal_targets); \
	  rm -rf normal-parallel || true; \
	  for idx in $(check_p_subdirs); do \
	    if [ -d normal$$idx ]; then \
	      mv -f normal$$idx/libstdc++.sum normal$$idx/libstdc++.sum.sep; \
	      mv -f normal$$idx/libstdc++.log normal$$idx/libstdc++.log.sep; \
	    fi; \
	  done; \
	  $(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh \
	    normal[0-9]*/libstdc++.sum.sep > libstdc++.sum; \
	  $(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh -L \
	    normal[0-9]*/libstdc++.log.sep > libstdc++.log; \
	  exit 0; \
	fi; \
	srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
	EXPECT=$(EXPECT); export EXPECT; \
	runtest=$(RUNTEST); \
	if [ -z "$$runtest" ]; then runtest=runtest; fi; \
	tool=libstdc++; \
	if [ -n "$*" ]; then \
	  if [ -f normal-parallel/finished ]; then rm -rf "$*"; exit 0; fi; \
	  GCC_RUNTEST_PARALLELIZE_DIR=`${PWD_COMMAND}`/normal-parallel; \
	  export GCC_RUNTEST_PARALLELIZE_DIR; \
	  cd "$*"; \
	fi; \
	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
	  $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) \
		    $(RUNTESTFLAGS); \
	  if [ -n "$*" ]; then \
	    touch $$GCC_RUNTEST_PARALLELIZE_DIR/finished; \
	  fi; \
	else \
	  echo "WARNING: could not find \`runtest'" 1>&2; :;\
	fi

check-am:
	$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
.PHONY: check-DEJAGNU

# Use 'new-abi-baseline' to create an initial symbol file.  Then run
# 'check-abi' to test for changes against that file.
check-abi: site.exp baseline_symbols 
	-@runtest $(AM_RUNTESTFLAGS) --tool libstdc++ $(RUNTESTFLAGS) abi.exp
check-compile: testsuite_files ${compile_script}
	-@(chmod + ${compile_script}; \
	  ${compile_script} ${glibcxx_srcdir} ${glibcxx_builddir})
check-performance: testsuite_files_performance ${performance_script}
	-@(chmod + ${check_performance_script}; \
	  CXXFLAGS='$(CXXFLAGS)'; export CXXFLAGS; \
	  ${check_performance_script} ${glibcxx_srcdir} ${glibcxx_builddir})

# Runs the simd tests.
check-simd: $(srcdir)/experimental/simd/generate_makefile.sh \
	    ${glibcxx_srcdir}/scripts/check_simd \
	    testsuite_files_simd \
	    ${glibcxx_builddir}/scripts/testsuite_flags
	@rm -f .simd.summary
	@echo "Generating simd testsuite subdirs and Makefiles ..."
	@${glibcxx_srcdir}/scripts/check_simd "${glibcxx_srcdir}" "${glibcxx_builddir}" "$(CXXFLAGS)" | \
	  while read subdir; do \
	    $(MAKE) -C "$${subdir}"; \
	    tail -n20 $${subdir}/simd_testsuite.sum | \
	      grep -A20 -B1 'Summary ===' >> .simd.summary; \
	  done; \
	  cat .simd.summary && rm .simd.summary

check-debug: site.exp
	outputdir=debug; export outputdir; \
	if test ! -d $${outputdir}; then \
	  mkdir $${outputdir}; \
	fi; \
	srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
	EXPECT=$(EXPECT); export EXPECT; \
	$(MAKE) RUNTESTFLAGS="$(RUNTESTFLAGS) conformance.exp --outdir $${outputdir} --objdir $${outputdir} --target_board=$(debug_flags)" check-DEJAGNU;

check-parallel: site.exp
	-@(if test ! -d $${libgomp_dir}; then \
	  echo "Testing parallel mode failed as libgomp not present."; \
	  exit 1; \
	fi; \
	outputdir=parallel; export outputdir; \
	if test ! -d $${outputdir}; then \
	  mkdir $${outputdir}; \
	fi; \
	srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
	EXPECT=$(EXPECT); export EXPECT; \
	$(MAKE) CXXFLAGS="$(atomic_flags) $(libgomp_flags)" RUNTESTFLAGS="$(RUNTESTFLAGS) conformance.exp --outdir $${outputdir} --objdir $${outputdir} --target_board=$(parallel_flags)" check-DEJAGNU; )

check-performance-parallel: testsuite_files_performance ${performance_script}
	-@(chmod + ${check_performance_script}; \
	CXXFLAGS="-D_GLIBCXX_PARALLEL -fopenmp $(atomic_flags) $(libgomp_flags)"; export CXXFLAGS; \
	${check_performance_script} ${glibcxx_srcdir} ${glibcxx_builddir})

.PHONY: baseline_symbols new-abi-baseline \
	check-abi check-compile check-performance check-parallel

# To remove directories.
clean-local:
	rm -rf de fr debug parallel binaries normal* simd

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
