# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
# see docs/Kconfig-language.txt.
#

menu "Coreutils"

config FEATURE_VERBOSE
	bool "Support verbose options (usually -v) for various applets"
	default y
	help
	Enable cp -v, rm -v and similar messages.
	Also enables long option (--verbose) if it exists.
	Without this option, -v is accepted but ignored.

comment "Common options for date and touch"

config FEATURE_TIMEZONE
	bool "Allow timezone in dates"
	default y
	depends on DESKTOP
	help
	Permit the use of timezones when parsing user-provided data
	strings, e.g. '1996-04-09 12:45:00 -0500'.

	This requires support for the '%z' extension to strptime() which
	may not be available in all implementations.

comment "Common options for cp and mv"
	depends on CP || MV

config FEATURE_PRESERVE_HARDLINKS
	bool "Preserve hard links"
	default y
	depends on CP || MV
	help
	Allow cp and mv to preserve hard links.

comment "Common options for df, du, ls"
	depends on DF || DU || LS

config FEATURE_HUMAN_READABLE
	bool "Support human readable output (example 13k, 23M, 235G)"
	default y
	depends on DF || DU || LS
	help
	Allow df, du, and ls to have human readable output.

config BASENAME
	bool "basename (438 bytes)"
	default y
	help
	basename is used to strip the directory and suffix from filenames,
	leaving just the filename itself. Enable this option if you wish
	to enable the 'basename' utility.
config CAT
	bool "cat (5.6 kb)"
	default y
	help
	cat is used to concatenate files and print them to the standard
	output. Enable this option if you wish to enable the 'cat' utility.

config FEATURE_CATN
	bool "Enable -n and -b options"
	default y
	depends on CAT
	help
	-n numbers all output lines while -b numbers nonempty output lines.

config FEATURE_CATV
	bool "cat -v[etA]"
	default y
	depends on CAT
	help
	Display nonprinting characters as escape sequences
config CHGRP
	bool "chgrp (7.6 kb)"
	default y
	help
	chgrp is used to change the group ownership of files.
config CHMOD
	bool "chmod (5.5 kb)"
	default y
	help
	chmod is used to change the access permission of files.
config CHOWN
	bool "chown (7.6 kb)"
	default y
	help
	chown is used to change the user and/or group ownership
	of files.

config FEATURE_CHOWN_LONG_OPTIONS
	bool "Enable long options"
	default y
	depends on CHOWN && LONG_OPTS
config CHROOT
	bool "chroot (3.7 kb)"
	default y
	help
	chroot is used to change the root directory and run a command.
	The default command is '/bin/sh'.
config CKSUM
	bool "cksum (4.1 kb)"
	default y

config CRC32
	bool "crc32 (4.1 kb)"
	default y
config COMM
	bool "comm (4.2 kb)"
	default y
	help
	comm is used to compare two files line by line and return
	a three-column output.
config CP
	bool "cp (10 kb)"
	default y
	help
	cp is used to copy files and directories.

config FEATURE_CP_LONG_OPTIONS
	bool "Enable long options"
	default y
	depends on CP && LONG_OPTS
	help
	Enable long options.
	Also add support for --parents option.

config FEATURE_CP_REFLINK
	bool "Enable --reflink[=auto]"
	default y
	depends on FEATURE_CP_LONG_OPTIONS
config CUT
	bool "cut (5.8 kb)"
	default y
	help
	cut is used to print selected parts of lines from
	each file to stdout.

config FEATURE_CUT_REGEX
	bool "cut -F"
	default y
	depends on CUT
	help
	Allow regex based delimiters.
config DATE
	bool "date (7 kb)"
	default y
	help
	date is used to set the system date or display the
	current time in the given format.

config FEATURE_DATE_ISOFMT
	bool "Enable ISO date format output (-I)"
	default y
	depends on DATE
	help
	Enable option (-I) to output an ISO-8601 compliant
	date/time string.

config FEATURE_DATE_NANO
	bool "Support %[num]N nanosecond format specifier"
	default n # stat's nanosecond field is a bit non-portable
	depends on DATE
	help
	Support %[num]N format specifier. Adds ~250 bytes of code.

config FEATURE_DATE_COMPAT
	bool "Support weird 'date MMDDhhmm[[YY]YY][.ss]' format"
	default y
	depends on DATE
	help
	System time can be set by 'date -s DATE' and simply 'date DATE',
	but formats of DATE string are different. 'date DATE' accepts
	a rather weird MMDDhhmm[[YY]YY][.ss] format with completely
	unnatural placement of year between minutes and seconds.
	date -s (and other commands like touch -d) use more sensible
	formats (for one, ISO format YYYY-MM-DD hh:mm:ss.ssssss).

	With this option off, 'date DATE' and 'date -s DATE' support
	the same format. With it on, 'date DATE' additionally supports
	MMDDhhmm[[YY]YY][.ss] format.
config DD
	bool "dd (7.5 kb)"
	default y
	help
	dd copies a file (from standard input to standard output,
	by default) using specific input and output blocksizes,
	while optionally performing conversions on it.

config FEATURE_DD_SIGNAL_HANDLING
	bool "Enable signal handling for status reporting"
	default y
	depends on DD
	help
	Sending a SIGUSR1 signal to a running 'dd' process makes it
	print to standard error the number of records read and written
	so far, then to resume copying.

	$ dd if=/dev/zero of=/dev/null &
	$ pid=$!; kill -USR1 $pid; sleep 1; kill $pid
	10899206+0 records in
	10899206+0 records out

config FEATURE_DD_THIRD_STATUS_LINE
	bool "Enable the third status line upon signal"
	default y
	depends on DD && FEATURE_DD_SIGNAL_HANDLING
	help
	Displays a coreutils-like third status line with transferred bytes,
	elapsed time and speed.

config FEATURE_DD_IBS_OBS
	bool "Enable ibs, obs, iflag, oflag and conv options"
	default y
	depends on DD
	help
	Enable support for writing a certain number of bytes in and out,
	at a time, and performing conversions on the data stream.

config FEATURE_DD_STATUS
	bool "Enable status display options"
	default y
	depends on DD
	help
	Enable support for status=noxfer/none option.
config DF
	bool "df (6.8 kb)"
	default y
	help
	df reports the amount of disk space used and available
	on filesystems.

config FEATURE_DF_FANCY
	bool "Enable -a, -i, -B"
	default y
	depends on DF
	help
	-a Show all filesystems
	-i Inodes
	-B <SIZE> Blocksize

config FEATURE_SKIP_ROOTFS
	bool "Skip rootfs in mount table"
	default y
	depends on DF
	help
	Ignore rootfs entry in mount table.

	In Linux, kernel has a special filesystem, rootfs, which is initially
	mounted on /. It contains initramfs data, if kernel is configured
	to have one. Usually, another file system is mounted over / early
	in boot process, and therefore most tools which manipulate
	mount table, such as df, will skip rootfs entry.

	However, some systems do not mount anything on /.
	If you need to configure busybox for one of these systems,
	you may find it useful to turn this option off to make df show
	initramfs statistics.

	Otherwise, choose Y.
config DIRNAME
	bool "dirname (329 bytes)"
	default y
	help
	dirname is used to strip a non-directory suffix from
	a file name.
config DOS2UNIX
	bool "dos2unix (5.2 kb)"
	default y
	help
	dos2unix is used to convert a text file from DOS format to
	UNIX format, and vice versa.

config UNIX2DOS
	bool "unix2dos (5.2 kb)"
	default y
	help
	unix2dos is used to convert a text file from UNIX format to
	DOS format, and vice versa.
config DU
	bool "du (6.3 kb)"
	default y
	help
	du is used to report the amount of disk space used
	for specified files.

config FEATURE_DU_DEFAULT_BLOCKSIZE_1K
	bool "Use default blocksize of 1024 bytes (else it's 512 bytes)"
	default y
	depends on DU
config ECHO
	bool "echo (1.8 kb)"
	default y
	help
	echo prints a specified string to stdout.

# this entry also appears in shell/Config.in, next to the echo builtin
config FEATURE_FANCY_ECHO
	bool "Enable -n and -e options"
	default y
	depends on ECHO || ASH_ECHO || HUSH_ECHO
config ENV
	bool "env (4 kb)"
	default y
	help
	env is used to set an environment variable and run
	a command; without options it displays the current
	environment.
config EXPAND
	bool "expand (5.1 kb)"
	default y
	help
	By default, convert all tabs to spaces.

config UNEXPAND
	bool "unexpand (5.3 kb)"
	default y
	help
	By default, convert only leading sequences of blanks to tabs.
config EXPR
	bool "expr (6.6 kb)"
	default y
	help
	expr is used to calculate numbers and print the result
	to standard output.

config EXPR_MATH_SUPPORT_64
	bool "Extend Posix numbers support to 64 bit"
	default y
	depends on EXPR
	help
	Enable 64-bit math support in the expr applet. This will make
	the applet slightly larger, but will allow computation with very
	large numbers.
config FACTOR
	bool "factor (2.7 kb)"
	default y
	help
	factor factorizes integers
config FALSE
	bool "false (tiny)"
	default y
	help
	false returns an exit code of FALSE (1).
config FOLD
	bool "fold (4.6 kb)"
	default y
	help
	Wrap text to fit a specific width.
config HEAD
	bool "head (3.8 kb)"
	default y
	help
	head is used to print the first specified number of lines
	from files.

config FEATURE_FANCY_HEAD
	bool "Enable -c, -q, and -v"
	default y
	depends on HEAD
config HOSTID
	bool "hostid (286 bytes)"
	default y
	help
	hostid prints the numeric identifier (in hexadecimal) for
	the current host.
config ID
	bool "id (7 kb)"
	default y
	help
	id displays the current user and group ID names.

config GROUPS
	bool "groups (6.7 kb)"
	default y
	help
	Print the group names associated with current user id.
config INSTALL
	bool "install (12 kb)"
	default y
	help
	Copy files and set attributes.

config FEATURE_INSTALL_LONG_OPTIONS
	bool "Enable long options"
	default y
	depends on INSTALL && LONG_OPTS
config LINK
	bool "link (3.2 kb)"
	default y
	help
	link creates hard links between files.
config LN
	bool "ln (4.9 kb)"
	default y
	help
	ln is used to create hard or soft links between files.
config LOGNAME
	bool "logname (1.1 kb)"
	default y
	help
	logname is used to print the current user's login name.
config LS
	bool "ls (14 kb)"
	default y
	help
	ls is used to list the contents of directories.

config FEATURE_LS_FILETYPES
	bool "Enable filetyping options (-p and -F)"
	default y
	depends on LS

config FEATURE_LS_FOLLOWLINKS
	bool "Enable symlinks dereferencing (-L)"
	default y
	depends on LS

config FEATURE_LS_RECURSIVE
	bool "Enable recursion (-R)"
	default y
	depends on LS

config FEATURE_LS_WIDTH
	bool "Enable -w WIDTH and window size autodetection"
	default y
	depends on LS

config FEATURE_LS_SORTFILES
	bool "Sort the file names"
	default y
	depends on LS
	help
	Allow ls to sort file names alphabetically.

config FEATURE_LS_TIMESTAMPS
	bool "Show file timestamps"
	default y
	depends on LS
	help
	Allow ls to display timestamps for files.

config FEATURE_LS_USERNAME
	bool "Show username/groupnames"
	default y
	depends on LS
	help
	Allow ls to display username/groupname for files.

config FEATURE_LS_COLOR
	bool "Allow use of color to identify file types"
	default y
	depends on LS && LONG_OPTS
	help
	This enables the --color option to ls.

config FEATURE_LS_COLOR_IS_DEFAULT
	bool "Produce colored ls output by default"
	default y
	depends on FEATURE_LS_COLOR
	help
	Saying yes here will turn coloring on by default,
	even if no "--color" option is given to the ls command.
	This is not recommended, since the colors are not
	configurable, and the output may not be legible on
	many output screens.
config MD5SUM
	bool "md5sum (6.5 kb)"
	default y
	help
	Compute and check MD5 message digest

config SHA1SUM
	bool "sha1sum (5.9 kb)"
	default y
	help
	Compute and check SHA1 message digest

config SHA256SUM
	bool "sha256sum (7 kb)"
	default y
	help
	Compute and check SHA256 message digest

config SHA512SUM
	bool "sha512sum (7.4 kb)"
	default y
	help
	Compute and check SHA512 message digest

config SHA3SUM
	bool "sha3sum (6.1 kb)"
	default y
	help
	Compute and check SHA3 message digest

comment "Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum"
	depends on MD5SUM || SHA1SUM || SHA256SUM || SHA512SUM || SHA3SUM

config FEATURE_MD5_SHA1_SUM_CHECK
	bool "Enable -c, -s and -w options"
	default y
	depends on MD5SUM || SHA1SUM || SHA256SUM || SHA512SUM || SHA3SUM
	help
	Enabling the -c options allows files to be checked
	against pre-calculated hash values.
	-s and -w are useful options when verifying checksums.
config MKDIR
	bool "mkdir (4.5 kb)"
	default y
	help
	mkdir is used to create directories with the specified names.
config MKFIFO
	bool "mkfifo (3.8 kb)"
	default y
	help
	mkfifo is used to create FIFOs (named pipes).
	The 'mknod' program can also create FIFOs.
config MKNOD
	bool "mknod (4.5 kb)"
	default y
	help
	mknod is used to create FIFOs or block/character special
	files with the specified names.
config MKTEMP
	bool "mktemp (4.2 kb)"
	default y
	help
	mktemp is used to create unique temporary files
config MV
	bool "mv (10 kb)"
	default y
	help
	mv is used to move or rename files or directories.
config NICE
	bool "nice (2.1 kb)"
	default y
	help
	nice runs a program with modified scheduling priority.
config NL
	bool "nl (4.6 kb)"
	default y
	help
	nl is used to number lines of files.
config NOHUP
	bool "nohup (2 kb)"
	default y
	help
	run a command immune to hangups, with output to a non-tty.
config NPROC
	bool "nproc (3.7 kb)"
	default y
	help
	Print number of CPUs
config OD
	bool "od (11 kb)"
	default y
	help
	od is used to dump binary files in octal and other formats.
config PASTE
	bool "paste (4.9 kb)"
	default y
	help
	paste is used to paste lines of different files together
	and write the result to stdout
config PRINTENV
	bool "printenv (1.3 kb)"
	default y
	help
	printenv is used to print all or part of environment.
config PRINTF
	bool "printf (3.8 kb)"
	default y
	help
	printf is used to format and print specified strings.
	It's similar to 'echo' except it has more options.
config PWD
	bool "pwd (3.7 kb)"
	default y
	help
	pwd is used to print the current directory.
config READLINK
	bool "readlink (4 kb)"
	default y
	help
	This program reads a symbolic link and returns the name
	of the file it points to

config FEATURE_READLINK_FOLLOW
	bool "Enable canonicalization by following all symlinks (-f)"
	default y
	depends on READLINK
	help
	Enable the readlink option (-f).
config REALPATH
	bool "realpath (1.6 kb)"
	default y
	help
	Return the canonicalized absolute pathname.
	This isn't provided by GNU shellutils, but where else does it belong.
config RM
	bool "rm (5.4 kb)"
	default y
	help
	rm is used to remove files or directories.
config RMDIR
	bool "rmdir (3.5 kb)"
	default y
	help
	rmdir is used to remove empty directories.
config SEQ
	bool "seq (3.8 kb)"
	default y
	help
	print a sequence of numbers
config SHRED
	bool "shred (4.9 kb)"
	default y
	help
	Overwrite a file to hide its contents, and optionally delete it
config SHUF
	bool "shuf (5.4 kb)"
	default y
	help
	Generate random permutations
config SLEEP
	bool "sleep (2 kb)"
	default y
	help
	sleep is used to pause for a specified number of seconds.
	It comes in 3 versions:
	- small: takes one integer parameter
	- fancy: takes multiple integer arguments with suffixes:
		sleep 1d 2h 3m 15s
	- fancy with fractional numbers:
		sleep 2.3s 4.5h sleeps for 16202.3 seconds
	Last one is "the most compatible" with coreutils sleep,
	but it adds around 1k of code.

config FEATURE_FANCY_SLEEP
	bool "Enable multiple arguments and s/m/h/d suffixes"
	default y
	depends on SLEEP
	help
	Allow sleep to pause for specified minutes, hours, and days.
config SORT
	bool "sort (7.7 kb)"
	default y
	help
	sort is used to sort lines of text in specified files.

config FEATURE_SORT_BIG
	bool "Full SuSv3 compliant sort (support -ktcbdfioghM)"
	default y
	depends on SORT
	help
	Without this, sort only supports -rusz, and an integer version
	of -n. Selecting this adds sort keys, floating point support, and
	more. This adds a little over 3k to a nonstatic build on x86.

	The SuSv3 sort standard is available at:
	http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html

config FEATURE_SORT_OPTIMIZE_MEMORY
	bool "Use less memory (but might be slower)"
	default n   # defaults to N since we are size-paranoid tribe
	depends on SORT
	help
	Attempt to use less memory (by storing only one copy
	of duplicated lines, and such). Useful if you work on huge files.
config SPLIT
	bool "split (5 kb)"
	default y
	help
	Split a file into pieces.

config FEATURE_SPLIT_FANCY
	bool "Fancy extensions"
	default y
	depends on SPLIT
	help
	Add support for features not required by SUSv3.
	Supports additional suffixes 'b' for 512 bytes,
	'g' for 1GiB for the -b option.
config STAT
	bool "stat (11 kb)"
	default y
	help
	display file or filesystem status.

config FEATURE_STAT_FORMAT
	bool "Enable custom formats (-c)"
	default y
	depends on STAT
	help
	Without this, stat will not support the '-c format' option where
	users can pass a custom format string for output. This adds about
	7k to a nonstatic build on amd64.

config FEATURE_STAT_FILESYSTEM
	bool "Enable display of filesystem status (-f)"
	default y
	depends on STAT
	help
	Without this, stat will not support the '-f' option to display
	information about filesystem status.
config STTY
	bool "stty (8.9 kb)"
	default y
	help
	stty is used to change and print terminal line settings.
config SUM
	bool "sum (4 kb)"
	default y
	help
	checksum and count the blocks in a file
config SYNC
	bool "sync (3.8 kb)"
	default y
	help
	sync is used to flush filesystem buffers.
config FEATURE_SYNC_FANCY
	bool "Enable -d and -f flags (requires syncfs(2) in libc)"
	default y
	depends on SYNC
	help
	sync -d FILE... executes fdatasync() on each FILE.
	sync -f FILE... executes syncfs() on each FILE.
config FSYNC
	bool "fsync (3.6 kb)"
	default y
	help
	fsync is used to flush file-related cached blocks to disk.
config TAC
	bool "tac (3.9 kb)"
	default y
	help
	tac is used to concatenate and print files in reverse.
config TAIL
	bool "tail (6.8 kb)"
	default y
	help
	tail is used to print the last specified number of lines
	from files.

config FEATURE_FANCY_TAIL
	bool "Enable -q, -s, -v, and -F options"
	default y
	depends on TAIL
	help
	These options are provided by GNU tail, but
	are not specified in the SUSv3 standard:
		-q      Never output headers giving file names
		-s SEC  Wait SEC seconds between reads with -f
		-v      Always output headers giving file names
		-F      Same as -f, but keep retrying
config TEE
	bool "tee (4.2 kb)"
	default y
	help
	tee is used to read from standard input and write
	to standard output and files.

config FEATURE_TEE_USE_BLOCK_IO
	bool "Enable block I/O (larger/faster) instead of byte I/O"
	default y
	depends on TEE
	help
	Enable this option for a faster tee, at expense of size.
config TEST
	bool "test (4.1 kb)"
	default y
	help
	test is used to check file types and compare values,
	returning an appropriate exit code. The bash shell
	has test built in, ash can build it in optionally.

config TEST1
	bool "test as ["
	default y
	help
	Provide test command in the "[ EXPR ]" form

config TEST2
	bool "test as [["
	default y
	help
	Provide test command in the "[[ EXPR ]]" form

config FEATURE_TEST_64
	bool "Extend test to 64 bit"
	default y
	depends on TEST || TEST1 || TEST2 || ASH_TEST || HUSH_TEST
	help
	Enable 64-bit support in test.
config TIMEOUT
	bool "timeout (6 kb)"
	default y
	help
	Runs a program and watches it. If it does not terminate in
	specified number of seconds, it is sent a signal.
config TOUCH
	bool "touch (5.9 kb)"
	default y
	help
	touch is used to create or change the access and/or
	modification timestamp of specified files.

config FEATURE_TOUCH_SUSV3
	bool "Add support for SUSV3 features (-a -d -m -t -r)"
	default y
	depends on TOUCH
	help
	Enable touch to use a reference file or a given date/time argument.
config TR
	bool "tr (5.1 kb)"
	default y
	help
	tr is used to squeeze, and/or delete characters from standard
	input, writing to standard output.

config FEATURE_TR_CLASSES
	bool "Enable character classes (such as [:upper:])"
	default y
	depends on TR
	help
	Enable character classes, enabling commands such as:
	tr [:upper:] [:lower:] to convert input into lowercase.

config FEATURE_TR_EQUIV
	bool "Enable equivalence classes"
	default y
	depends on TR
	help
	Enable equivalence classes, which essentially add the enclosed
	character to the current set. For instance, tr [=a=] xyz would
	replace all instances of 'a' with 'xyz'. This option is mainly
	useful for cases when no other way of expressing a character
	is possible.
config TRUE
	bool "true (tiny)"
	default y
	help
	true returns an exit code of TRUE (0).
config TRUNCATE
	bool "truncate (4.2 kb)"
	default y
	help
	truncate truncates files to a given size. If a file does
	not exist, it is created unless told otherwise.
config TSORT
	bool "tsort (0.7 kb)"
	default y
	help
	tsort performs a topological sort.
config TTY
	bool "tty (3.6 kb)"
	default y
	help
	tty is used to print the name of the current terminal to
	standard output.
config UNAME
	bool "uname (3.9 kb)"
	default y
	help
	uname is used to print system information.

config UNAME_OSNAME
	string "Operating system name"
	default "GNU/Linux"
	depends on UNAME
	help
	Sets the operating system name reported by uname -o.  The
	default is "GNU/Linux".

config BB_ARCH
	bool "arch (1.1 kb)"
	default y
	help
	Same as uname -m.
config UNIQ
	bool "uniq (4.9 kb)"
	default y
	help
	uniq is used to remove duplicate lines from a sorted file.
config UNLINK
	bool "unlink (3.2 kb)"
	default y
	help
	unlink deletes a file by calling unlink()
config USLEEP
	bool "usleep (1.3 kb)"
	default y
	help
	usleep is used to pause for a specified number of microseconds.
config UUDECODE
	bool "uudecode (5.8 kb)"
	default y
	help
	uudecode is used to decode a uuencoded file.
config BASE32
	bool "base32 (4.9 kb)"
	default y
	help
	Base32 encode and decode
config BASE64
	bool "base64 (4.9 kb)"
	default y
	help
	Base64 encode and decode
config UUENCODE
	bool "uuencode (4.4 kb)"
	default y
	help
	uuencode is used to uuencode a file.
config WC
	bool "wc (4.5 kb)"
	default y
	help
	wc is used to print the number of bytes, words, and lines,
	in specified files.

config FEATURE_WC_LARGE
	bool "Support very large counts"
	default y
	depends on WC
	help
	Use "unsigned long long" for counter variables.
config WHO
	bool "who (3.9 kb)"
	default y
	depends on FEATURE_UTMP
	help
	Print users currently logged on.

config W
	bool "w (3.8 kb)"
	default y
	depends on FEATURE_UTMP
	help
	Print users currently logged on.

config USERS
	bool "users (3.4 kb)"
	default y
	depends on FEATURE_UTMP
	help
	Print users currently logged on.
config WHOAMI
	bool "whoami (3.2 kb)"
	default y
	help
	whoami is used to print the username of the current
	user id (same as id -un).
config YES
	bool "yes (1.2 kb)"
	default y
	help
	yes is used to repeatedly output a specific string, or
	the default string 'y'.

endmenu
